SUUNTO Vyper - Manual (Page 58)

56
5. CARE AND MAINTENANCE
This SUUNTO dive computer is a sophisticated precision instrument. Though
designed to withstand the rigors of scuba diving you must treat it with proper care
and caution as any other precision instrument.
5.1. IMPORTANT INFORMATION
WATER RESISTANCE
This device will be watertight up to a static pressure of 10 ATM (100 m [328
ft]). Note, however, that dynamic pressure generated by movement underwater
is greater than static pressure.
DEPTH SENSOR
The built-in depth sensor of the dive computer is a sophisticated precision
component. Keep the area around the depth sensor clear from dirt, sand, dust or
other substances. Rinse the device thoroughly with fresh water and dry it with
a soft towel. Never use pins, needles or other objects to clean the depth sensor
(Fig. 2.3).
WATER CONTACTS AND PUSH BUTTONS
Contamination or dirt on the water contacts/connector or push buttons may prevent
the automatic activation of the Dive Mode and cause problems during the data
transfer. Therefore, it is important that the water contacts and push buttons are
kept clean. If the water contacts of the instrument are active (AC-text remains on
display) or the Dive Mode activates on its own, the reason for this is probably
contamination or invisible marine growth that may create an unwanted electric
current between the contacts. It is important that the dive computer is carefully
washed in fresh water after the day’s diving is completed. The contacts can be
cleaned with fresh water and, if necessary, a mild detergent and a soft brush.
Sometimes it might be necessary to remove the instrument from the protective
boot for cleaning.