En + drawings, General information, Lifetime – Petzl VERSO User Manual

Page 4: When to retire your equipment, Product obsolescence, Modifi cations and repairs, Storage, transport, Traceability and markings, Guarantee

Advertising
background image

4

D19 VERSO D195000B (100908)

12

Lifetime

WARNING, in extreme cases, the lifetime of the product can be reduced to one single use

through exposure to for example any of the following: chemicals, extreme temperatures,

sharp edges, major fall or load, etc.

The maximum lifetime of Petzl products is as follows: up to 10 years from the date of

manufacture for plastic and textile products. It is indefi nite for metallic products.

The actual lifetime of a product ends when it meets one of the retirement criteria listed

below (see “When to retire your equipment”), or when in its system use it is judged

obsolete.

The actual lifetime is infl uenced by a variety of factors such as: the intensity, frequency,

and environment of use, the competence of the user, how well the product is stored and

maintained, etc.

Inspect equipment periodically for damage and/or deterioration.

In addition to the inspection before and during use, a periodic in-depth inspection must

be carried out by a competent inspector. This inspection must be performed at least once

every 12 months. The frequency of the in-depth inspection must be governed by the type

and the intensity of use. To keep better track of your equipment, it is preferable to assign

each piece of equipment to a unique user so that he will know its history. The results of

inspections should be documented in an “inspection record”. This document must allow

recording of the following details: type of equipment, model, name and contact information

of the manufacturer or distributor, means of identifi cation (serial or individual number),

year of manufacture, date of purchase, date of fi rst use, name of user, all other pertinent

information for example maintenance and frequency of use, the history of periodic

inspections (date / comments and noted problems / name and signature of the competent

person who performed the inspection / anticipated date of next inspection). See example of

detailed inspection record and other informational tools available at www.petzl.com/ppe

When to retire your equipment

Immediately retire any equipment if:

- it fails to pass inspection (inspection before and during use and the periodic in-depth

inspection),

- it has been subjected to a major fall or load,

- you do not know its full usage history,

- it is at least 10 years old and made of plastics or textiles,

- you have any doubt as to its integrity.

Destroy retired equipment to prevent further use.

Product obsolescence

There are many reasons why a product may be judged obsolete and thus retired before the

end of its actual lifetime. Examples include: changes in applicable standards, regulations, or

legislation; development of new techniques, incompatibility with other equipment, etc.

Modifi cations and repairs

Do not modify your product in any way unless the modifi cation is specifi cally authorized by

Petzl. An unauthorized modifi cation can reduce the product’s effectiveness.

Repairs made outside of Petzl facilities are prohibited. Contact Petzl if your product needs

repair.

Storage, transport

Dry your harness after use and store it in a bag.

Store it away from exposure to UV, moisture, chemical products, etc.

Traceability and markings

Do not remove any markings or labels. You must check to ensure that the product markings

remain legible during the entire lifetime of the product.

Guarantee

This product is guaranteed for 3 years against any faults in materials or manufacture.

Exclusions from the guarantee: normal wear and tear, oxidation, modifi cations or

alterations, incorrect storage, poor maintenance, damage due to accidents, to negligence,

and to uses for which this product was not designed.

PETZL is not responsible for the consequences, direct, indirect or accidental, or any other

type of damage befalling or resulting from the use of its products.

General information

(EN) Maintenance

(FR) Entretien

(DE) Wartung

(IT) Manutenzione

(ES) Mantenimiento

PETZL

30 C

maxi

(EN) Drying

(FR) Séchage

(DE) Trocknen

(IT) Asciugamento

(ES) Secado

(EN) Storage / Transport

(FR) Stockage / Transport

(DE) Lagerung / Transport

(IT) Conservazione / Trasporto

(ES) Almacenamiento / Transporte

(EN)Temperature

(FR) Température

(DE) Temperatur

(IT)Temperatura

(ES) Temperatura

(EN) Dangerous products

(FR) Produits dangereux

(DE) Gefährliche Produkte

(IT) Prodotti pericolosi

(ES) Productos peligrosos

H2O

H2O

(EN) Cleaning / Disinfection

(FR) Nettoyage / Désinfection

(DE) Reinigung / Desinfektion

(IT) Pulizia / Disinfezione

(ES) Limpieza / Desinfección

+ 80°C

+ 176°F

- 40°F

- 40°C

(EN) Maintenance

(FR) Entretien

(DE) Wartung

(DE) W

(DE) W

(IT) Manutenzione

(ES) Mantenimiento

PETZL

(EN) Dangerous products

(FR) Produits dangereux

(DE) Gefährliche Produkte

(IT) Prodotti pericolosi

(ES) Productos peligrosos

Advertising