Accusys ExaSAN SW16 - Manual (Page 36)

3. Installation
User Guide Page 3-5
Figure 20: Connecting the PCIe QSFP cable to the client port
3.1.4 Connecting the switch LAN and power cord
1. Insert the Ethernet cable into eth0 (management port) and eth1 (private port for
MDC) on the SW16. The default IP addresses are 192.168.0.25 and 192.168.1.25.,
respectively.
Figure 21: Connecting the Ethernet cable to eth0 and eth1
2. After connecting the Ethernet cables, please connect the power cords to the both
power supply modules.
Figure 22: Connecting the power cords to the power supply module
Note