4 confirm leds on hba, Confirm leds on hba – Accusys ExaSAN SW16 User Manual
Page 47
Advertising
3. Installation
User Guide
Page 3-16
3.3.4 Confirm LEDs on HBA
Verify the Jumper Switch LED, Link LED, and Access LED on the backplane of the HBA
are appropriately lit according to your installation (Refer to Section 1.5.2 ExaSAN QSFP
Host Bus Adapter). If the LEDs are not on, please refer to the Appendix A FAQ Q3.
Note
For more detailed using info about RAIDGuard X, please refer to
the storage’s user manual.
Advertising