Figure 35: device manager in windows platform – Accusys ExaSAN SW16 User Manual
Page 46
3. Installation
User Guide
Page 3-15
3.3.3.2 Confirming the ExaSAN RAID system driver in Windows
After installing the ExaSAN RAID system HBA driver on a Windows based host server,
confirm the driver has been properly installed.
Go to Control Panel -> System Properties -> Hardware -> Device Manager (depending
on the version of Windows, the path may vary). If the driver has been correctly installed,
the HBA is listed with the ACS-6xxxx identifier (actual name may vary) as Storage
Controllers.
Figure 35: device manager in Windows platform
Caution
If you see the HBA listed as an unknown device under Windows,
follow the driver installation steps to reinstall the driver. If you do
not see the HBA under Device Manager, Windows does not
detect the card. Power off the host server to reseat the HBA.