Accusys ExaSAN SW16 - Manual (Page 50)

4. How to Use
User Guide Page 4-2
your changed password, you could push the reset button in back of
the SW16 for 13 seconds to go back the default setting. Please refer to
the section 1.4.1.4 for more detailed info.
Caution:
If you push reset hold but not disconnected the all clients, you might
damage your important data in the SAN environment.
Figure 37: Enter user name and password
4.1.3 Configuration menu - Overview
The following Figure is shown the three main functions,
• Quick Setup
• Event Management
• System management