Accusys ExaSAN SW16 - Manual (Page 57)

4. How to Use
User Guide Page 4-9
4.4.1 Configuring the network – “Network”
Users can use “NIC” option to choose “eth0” or “eth1” and then setup the parameters.
We strongly recommend using eth0 as public network for communicating with other
computer, which is not in the ExaSAN SAN environment and eth1 as private network for
ExaSAN SAN environment.
4.4.1.1 eth0 – SAN management port (RJ45)
Users can find the following info or setup the parameters in the page
• Disable “eth1”: Checking the box in front of “Disable eth1” to disable eth1 port.
• MAC address: User can find the MAC address of eth0 in the page
• Assignment method: To setup or change the IP of eth0. The default IP address is
“192.168.0.25”.
 IP address
 Network Mask
 Gateway
 DNS server
Figure 49: “eth0” setting
4.4.1.2 eth1 – SAN private port (RJ45)
Users can find the following info or setup the parameters in the page
• Disable “eth1”: Checking the box in front of “Disable eth1” to disable eth1 port.
• MAC address: User can find the MAC address of eth1 in the page
• Assignment method: To setup or change the IP of eth0. The default IP address is
“192.168.1.25”.
 IP address
 Network Mask