Tyco Electronics FOSC-400D5 - Manual (Page 14)

10.6 Secure all trays to the bottom tray
bracket with the Velcro strap as shown.
11.1 Identify each ribbon. Split each ribbon
into individual fibers. Follow the
manufacturer’s recommendations for the split-
ting ribbons. Splice and organise the fibers as
explained in section 10.
12.1 Open and remove the desiccant bag
from its package and place the desiccant bag
on the upper tray. Secure the trays and the
desiccant bag with the Velcro strap.
12.2 Ensure seal areas and sealing ring are
clean and that the sealing ring is in place at the
base.
12 Dome installation
11 Splicing of ribbon cable
Velcro strap
Ribbon
Important.
Make sure the sealing ring is well
positioned.