Acnodes RMC 5018 - Manual (Page 13)

RMC 5018
1U Rackmount System
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com. 14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
1-3 Server Chassis Features
The following is a general outline of the main features of the RMC5018 1U mini rackmount server
chassis.
System Power
The RMC5018 chassis includes a single 200W power supply.
SATA Subsystem
The RMC5018 chassis was designed to support one 3.5" or two 2.5" internal SATA drives (not hot-
swappable). ATA/100 IDE drives can be alternately sup- ported.
Note: The operating system you use must have RAID support to enable the hot- swap capability of the
SATA drives (RAID 0, 1, 5 and 10 supported).
Control Panel
The control panel on the RMC5018 provides important system monitoring and control information.
LEDs indicate power on, network activity, hard disk drive activity and system overheat. The control
panel also includes a main power button and a system reset button as well as two
Rear I/O Panel
The rear I/O panel on the RMC5018 provides one COM port, two USB ports, PS/2 mouse and key-
board ports, a graphics port and two Gb Ethernet ports.
Expansions Cards
The RMC5018 supports the use of one full-height, half length PCI expansion card.