Acnodes RMC 5018 - Manual (Page 39)

RMC 5018
1U Rackmount System
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com. 14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
Reset Button
The reset button (from the computer chassis) connects
to pins 3 and 4 of JF1. See the table on the right for pin
definitions.
Power Fail LED
The Power Fail LED connection is located on pins 5
and 6 of JF1. Re- fer to the table on the right for pin
definitions.
Overheat/Fan Fail
Connect an LED to pins 7 and 8 of JF1 to indicate fan
fail and provide advanced warning of chassis over-
heating. Refer to the table on the right for pin defini-
tions.
NIC2 (LAN2) LED
The LED connections for LAN2 are on pins 9 and 10 of
JF1. Attach an LED cable to display network activity.
See the table on the right for pin defini- tions. (LAN2 on
5015A-H only.)
NIC1 (LAN1) LED
The LED connections for LAN1 are on pins 11 and 12
of JF1. Attach an LED cable to display network activ-
ity. See the table on the right for pin definitions.
HDD LED
The HDD LED connection is located on pins 13 and 14
of JF1. Attach a hard drive LED cable here to display
disk activity (for any hard drive activ-
ity on the system, including SATA
and IDE).