Acnodes RMC 5018 - Manual (Page 43)

RMC 5018
1U Rackmount System
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com. 14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
LVDS Connector
An LVDS connector (J5) is available on the
X7SPA-L only. This connector provides 18-bit
LVDS (Low Voltage Differential Signaling) for an
LCD panel or other similar devices. Refer to the
table on the right for pin defini- tions.
Inverter Power Connector
The inverter connector on J6 is a 7-pin connector
and is used in conjunction with the LVDS connector.
Connect the backlight module of the LCD panel to
this socket. This controls the back- light lamp,
PWM control signals, and inverter power.
Universal Serial Bus (USB)
Four Universal Serial Bus ports (USB1/2/3/4) are
located on the I/O backpanel. Additionally, one
Type A USB port (USB10) and five USB headers
(USB5/6, 7/8, 9) are pro- vided on the motherboard
to provide front chassis access (cables are not
included). See the tables on the right for pin defini-
tions.