Activeforever Invacare Pronto M41 Power Wheelchair with Semi Recline Seat - Manual (Page 25)

SECTION 5—SAFETY INSPECTION
Part No. 1143206 25 Pronto® M41 with SureStep®
Inspect/Adjust Weekly
❑ Seat is secured to wheelchair frame.
❑ Seat and/or back upholstery have no rips and DO NOT sag. Replace if necessary.
❑ Seat release latch is not worn and is functional. Replace if necessary.
❑ Inspect tires for flat spots and wear.
❑ Ensure that casters are free of debris.
❑ Ensure arm pivot points are not worn and/or loose. Replace if necessary.
❑ Check that cables are routed and secured properly to ensure that cables DO NOT
become entangled and damaged during normal operation of seating system.
Inspect/Adjust Monthly
❑ Ensure wheel mounting nuts are secure on drive wheels.
❑ Ensure no excessive side movement or binding occurs when drive wheels are lifted
and spun when disengaged (freewheeling).
❑ Inspect caster assembly has proper tension when caster is spun. Caster should come
to a gradual stop.
❑ Ensure that casters are free of debris.
❑ Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.
❑ Ensure all caster/wheel/fork/headtube fasteners are secure.
❑ Inspect for any loose hardware on the wheelchair.
❑ Inspect the seat positioning strap for signs of wear. Replace if worn or damaged.
❑ Ensure that the buckle on the seat positioning strap latches. Replace if necessary.
❑ Verify that the hardware that attaches the seat positioning strap to the seat frame is
secure and undamaged. Replace if necessary.
❑ Inspect electrical components for signs of corrosion. Replace if corroded or damaged.
❑ Check that all labels are present and legible. Replace if necessary.