Activeforever Invacare Pronto M41 Power Wheelchair with Semi Recline Seat - Manual (Page 43)

SECTION 9—FOOTBOARD ASSEMBLY
Part No. 1143206 43 Pronto® M41 with SureStep®
Height
NOTE: For this procedure, refer to FIGURE 9.4.
1. Remove the quick release pin that secures the footboard assembly to the wheelchair
frame.
2. Remove the mounting bolt, sleeve, and locknut that secures the footboard to footboard
support bracket.
3. Align the footbard to one of the mounting holes on the footboard support bracket.
4. Secure the footboard to the footboard support bracket with the mounting bolt, sleeve
and locknut. Securely tighten.
FIGURE 9.4 Adjusting the Footboard Assembly - Height
Footboard
Footboard Support Bracket
Mounting
Bolt
Locknut
Mounting Holes
Sleeve