Activeforever Invacare Pronto M41 Power Wheelchair with Semi Recline Seat - Manual (Page 42)

SECTION 9—FOOTBOARD ASSEMBLY
Pronto® M41 with SureStep® 42 Part No. 1143206
Depth
NOTE: For this procedure, refer to FIGURE 9.3.
1. Remove the quick release pin that secures the footboard assembly to the wheelchair frame.
ƽ WARNING
Make sure the detent balls of the quick-release pin are fully released beyond the
outer edge of the tube before operating the wheelchair. Otherwise, injury and/or
damage may result.
Keep detent balls clean
2. Adjust footboard to one of three mounting positions.
3. Install the quick release pin. Make sure the detent balls are engaged with the outer
edge of the tube (Detail “A” of FIGURE 9.3).
FIGURE 9.3 Adjusting the Footboard Assembly - Depth
DETAIL “A” - TOP VIEW
OF FOOTBOARD
Quick
Release Pin
Detent Ball
Footboard
Assembly
Mounting
Hole
Shroud
Three Depth
Adjustment Holes
Quick
Release Pin
Outer Edge of Tube
Detent Balls