AASTRA 7446ip (5446ip) for MX-ONE User Guide EN - Manual (Page 22)

6/1553-DBC 446 01 Uen E8 2010-07-08 22
S TARTING THE P HONE
Continued startup procedure
After you have logged on successfully, the display shows the logon prog-
ress. When the self test, has been successfully completed, the phone
either logs on automatically, or prompts you to enter your extension
number and PIN or password.
Update software
If the system detects new software, the following display appears during
the startup procedure:
Figure 5: Software Update Screen
You have two options:
Select No to skip the update and keep the current software version.
Select Yes to start downloading the software update from the software
server. The update process takes approximately 60 seconds to
complete, and the progress is displayed on screen.
If you do nothing, the software update will start automatically after 60
seconds. In the lower right corner of the window, a counter indicates how
many seconds remain before the automatic update will start.
Note: Be careful not to disconnect the phone during the update since a
power failure during the software update will require you to restart
the update.
4.2 Logon Options
Depending on the user logon settings, your phone may require a logon.
Note: Changing the logon settings requires administrator rights.
There are three logon options: