AASTRA 7446ip (5446ip) for MX-ONE User Guide EN - Manual (Page 26)

6/1553-DBC 446 01 Uen E8 2010-07-08 26
I NCOMING C ALLS
5 Incoming Calls
Incoming calls are indicated by a ring signal and a presentation of name
or number or both on either line button.
The ring signal differs depending on whether the incoming call is internal
or external:
• Internal calls are identified by one long signal followed by a long
pause.
• External calls are identified by two short signals followed by a short
pause.
5.1 Answer Calls
An incoming call is indicated by a ring signal and a flashing indicator
lamp.
Handset: Lift the handset. The call is automatically received on Line 1.
Handsfree: Press the Line 1 button to answer without lifting the handset.
(You can then switch to the handset simply by lifting the handset.)
To reject an incoming call, tap the Reject button.
5.2 Automatic Answer
With the automatic answer feature, a call is answered automatically in
handsfree mode. This means that you get speech connection without
having to perform any action. The feature is set by the system adminis-
trator.
There are two optional settings for the automatic answer feature:
• With delay: One ring signal is heard before the call is answered.
• Without delay: The call is answered immediately, no ring signal is
heard.
Changing the automatic answer setting requires administrator rights, but
you can view the current settings.
To view the automatic answer settings, do the following:
1. Tap icon at the top menu bar.