AASTRA 7446ip (5446ip) for MX-ONE User Guide EN - Manual (Page 42)

6/1553-DBC 446 01 Uen E8 2010-07-08 42
D URING C ALLS
3) Tap the Conference button.
4) Repeat the procedure to add more conference members.
5) Replace the handset or press C to leave the conference.
SIP Phones
1) Tap the Line.
2) Dial the number to the third party and wait for an answer.
3) Tap the Call button.
4) Repeat the procedure to add more conference members.
5) Replace the handset or press C to leave the conference.
Note: A tone is heard each time a participant enters or leaves the
conference. When the conference leader leaves the conference,
the conference will continue with the other included parties. The
conversation is changed back to a normal two party connection
when there are only two parties left.
7.4 Parking
You can temporarily put the ongoing call on hold. Calls put on hold can
be resumed on your own or on another phone.
To put a call on hold, do the following:
1) Tap the Hold button.
If you tap Inquiry or the Line button where you have the call, the
ongoing call is automatically put on hold.
2) Replace the handset.
To put a call on common hold, do the following (only valid for H.323
phones):
Note: To put call on common hold, the extension must be MNS repre-
sented.
1. Tap the Hold button.
If you tap Inquiry or the Line button where you have the call, the
ongoing call is automatically put on hold.
2. Replace the handset.