Soft dB Tenor 24bits Data User Guide - Manual (Page 10)

Tenor Data Logger Soft dB inc.
4.2 Set-up interface
The Figure 4 shows the main interface just after launching the Tenor software.
Figure 4: Tenor Software (Set-up Tab)
The main interface has three tabs: 1) the set-up tab, 2) the acquisition tab and 3) the post-
processing tab. The set-up tab allows specifying the configuration of the instrument. Four
groups of parameters are presented in this tab (see next sections for details).
4.2.1 General Set-up
Figure 5: General Set-up section
User Manual p. 10