Soft dB Tenor 24bits Data User Guide - Manual (Page 26)

Tenor Data Logger Soft dB inc.
5.0 Post-Processing
The post-processing tab includes a complete software tool allowing the analysis of a multi-
channel wave file. The post-processing can be used even if the external Tenor unit is not
present. The post-processing interface accepts wave files recorded with the Tenor
software and standard wave files. Tenor-recorded wave files always have an associated
configuration file that contains the complete configuration of the instrument. This
configuration file is automatically saved in the same folder as the wave file at the beginning
of the recording. This configuration file allows recovering a calibrated time signal. So, any
wave files not recorded with the Tenor system will not be calibrated (the Change Input Set-
up function can be used to calibrate the signal, see section 5.2.7 for more details).
The post-processing module is accessible in the Post-processing tab:
Figure 18: Main Post-Processing Interface
Note: when the Post-processing tab is selected, the interface automatically asks for a .wav
file.
User Manual p. 26