Software and usb driver installation – Soft dB Tenor 24bits Data User Guide User Manual
Page 4
Tenor Data Logger
Soft dB inc.
2.0 Software and USB driver installation
!
Do not connect the Tenor unit to your PC before installing the
software and the Tenor USB driver (Windows does not
automatically recognize the Tenor unit, and the wrong drivers
could be installed).
Follow each step below precisely to ensure proper installation of
the software and drivers on your PC.
See Appendix A for more details.
STEP 1: Installation of the Tenor Software
1)
Launch the installation CD provided with the unit and click on
“Tenor24Bit_DataLoggerVer2_0.exe",
You can also download the latest release of the Tenor software from the Soft dB
website at:
2)
The following window appears:
Figure 1: Self-Extractor message, which appears during the installation process
Click “Setup” and follow the installation procedure. By default, the Tenor software is
installed in the C:\Program Files\Tenor_24Bit directory. Do not start the Tenor
software after finishing this step. The USB driver has to be installed beforehand (Step
3).
User Manual
p. 4