Soft dB Tenor 24bits Data User Guide - Manual (Page 22)

Tenor Data Logger Soft dB inc.
The LEDs on the Tenor box are also useful for analyzing the saturation and low signal
level problems. The following table explains the meaning of the colour for input and output
LEDs:
LED colour description
Black Red Yellow Green
Inputs Not used Saturated Low Level Used
Outputs Not used --- --- Used
4.4.2 Global Indicators
The global level and the dynamic range indicators share the same tab at the bottom of the
acquisition interface.
Figure 13: Global Level indicators
The global level indicators present the calibrated global level of all activated inputs. The
scale of the indicator is automatically set by the interface following the minimum and
maximum global levels. The user can select a dB, dBA or linear display with the control at
the upper left of each global level indicator.
The input number turns red when saturation occurs on a specific input. The user can use
the Reset Sat. Indicators button to reset the saturation state (see section 4.4.1 for more
detail).
User Manual p. 22