Soft dB Tenor 24bits Data User Guide - Manual (Page 51)

Tenor Data Logger Soft dB inc.
5.5 Export/Save Tab
The Export/Save tab includes five functions to export the time signal data to a text file, a
wave file or a SDF file (Standard Data File from HP).
Here is a description of the Export/Save tab functions:
Function Description
This function exports the selected channel to a text
file. The exported signal is calibrated and the format of
the text file can be adjusted through a dedicated
dialog box*. This function saves only the selected
framework.
This function exports all channels in a text file. The
exported signals are calibrated and the format of the
text file can be adjusted through a dedicated dialog
box*. This function saves only the selected framework.
This function allows saving the selected channel in a
wave file. This function also saves the associated
configuration file for further analysis with the post-
processing interface.
This function allows saving all channel signals of the
selected framework in a wave file. This function also
saves the associated configuration file for further
analysis with the post-processing interface.
This function allows saving all channel signals of the
current selected .wav file in a SDF format. The SDF
format is a standard for the major spectrum analyzer
manufacturers.
*When a text format is chose for the export, the following dialog box is used to specify the
format of the data in the file:
User Manual p. 51