Soft dB Tenor 24bits Data User Guide - Manual (Page 6)

Tenor Data Logger Soft dB inc.
3.0 Hardware Description
The hardware unit of the Tenor acquisition system is based on a USB DSP/FPGA
acquisition board. It also includes an ICP conditioning board. The metal box that contains
the USB acquisition board is equipped with 12 BNC connectors for 8 inputs and 4 outputs.
The internal switches on the conditioning board allow selecting the Direct DC, Direct AC or
ICP input paths. Each input and output has a LED to indicate saturation or a low-level
problem.
Figure 2: Tenor Hardware Unit (front)
User Manual p. 6