Spicer Single Drive Axles Service Manual: 34DS, 34RS, 38DS, 38RS, DS340, RS340, DS380, RS380, DS400, RS400, DS3 - Manual (Page 49)

Power Divider Overhaul
46
Ser
vice Procedure
4. Inter-axle Differential. Lift differential assembly off output
shaft side gear.
5. Output Shaft. Tilt carrier and remove the output shaft as-
sembly.
6. Output Shaft Side Gear Bearing Cup. If replacement is
necessary, use puller to remove bearing cup from carrier.
Note: Late Model Axles may be equipped with a spring
and thrust button mounted between the input shaft
and output shaft.
Note: For instructions on removing axle housing cover
and output shaft rear bearing parts, see page 26.