Spicer Single Drive Axles Service Manual: 34DS, 34RS, 38DS, 38RS, DS340, RS340, DS380, RS380, DS400, RS400, DS3 - Manual (Page 52)

Power Divider Overhaul
49
7. Remove oil seal from input bearing cover. Remove bear-
ing cup from cover.
8. Remove input shaft bearing cone. Temporarily place lock-
out sliding clutch over rear of input shaft, teeth toward
bearing cone. Place shaft in press and remove bearing
cone.
9. Axles with Lube Pump: With drive gear locknut previously
removed (step 2) and working through power divider cov-
er input shaft bore, gently pry oil pump drive gear from its
shaft. See steps 10 through 12 for pump disassembly.
10. Remove oil pump cover cap screws and lock washers. Re-
move pump cover and "O" ring.
11. *NOTE: When used, remove woodruff key from gear
shaft. Remove pump gears from power divider cover.
12. Unscrew and remove magnetic screen from power divider
cover.