TROY Group MICR_IRD M600 Security Printing Solutions series User’s Guide - Manual (Page 101)

Section 6 Using the Printer Control Panel
Security Printing Solutions User’s Guide -- 50-70537-001 Rev. B
6-2
Accessing Printer
Features
Entering the
Administrator
Password
T O ACCESS PRINTER FEATURES :
1. Press the menu button.
2. Press the down arrow ▼or the up arrow ▲to navigate the listings.
3. Press the OK button to select the appropriate option.
4. Press the back arrow to return to the previous level.
5. Press the menu button to exit the menu.
6. Press the help ? button to see additional information about an item.
A valid administrator password must be entered at the printer control panel before access is allowed to any of the
TROY security features and settings. If an administrator password has not been previously set, then the default
password is blank (no password).
T O ENTER THE ADMINISTRATOR PASSWORD :
1. Press the menu button.
2. Press the down arrow ▼to select
TROY MENUS , and then press the OK button.
3. Press the down arrow ▼to select SECURITY MENU , and then press the OK button.
4. Ensure ACTION is highlighted, and then press the OK button.
5. Ensure LOG IN is highlighted, and then press the OK button. The printer will display SETTING SAVED and then
automatically return to the previous submenu.
6. Press the down arrow ▼to select USER ID , and then press the OK button.
7. Press the down arrow ▼to select the letter A , and then press the OK button. Repeat this process using the up
and down arrows until you have entered the word ADMIN and then press the OK button four times to continue.
8. Press the down arrow ▼to select PASSWORD , and then press the OK button.
9. Enter your password, and then press the OK button. If a password has not been set, then press the OK button
repeatedly to exit this field and continue.
10. Press the menu button to refresh the menu options. The menu options must be refreshed to ensure that
all available menu selections are displayed on the printer control panel.