TROY Group MICR_IRD M600 Security Printing Solutions series User’s Guide User Manual
Page 69
Section 4
Using the TROY Printer Utility
Security Printing Solutions User’s Guide -- 50-70537-001 Rev. B
4-23
Printing the
Pattern Processor
Report
NOTE: To enter a control character (nonprinting character) in a string, use the syntax “<0xhh>”, where “hh” is the
hexadecimal value of the desired character (e.g., to enter an escape character, use the syntax “<ox1b>”).
T
O PRINT THE
P
ATTERN
P
ROCESSOR REPORT
:
1. If the pattern processor window is
already open with the desired pattern
file (.ppx) displayed, click on File, and
then click on Print Pattern Processor
Settings – Printer Utility List. Select
the desired printer, and then click on
OK to print the report.
2. If the pattern processor window is not
open, from the Main Window, click on
Settings, and then click on Pattern
Processor.
3. Click on File, Open, and then select the
desired pattern file (*.ppx) from the
UserData folder.
4. Click on File, and then click on Print
Pattern Processor Settings – Printer
Utility List. Select the desired printer,
and then click on OK to print the report.