TROY Group MICR_IRD M600 Security Printing Solutions series User’s Guide - Manual (Page 94)

Section 5 Using the TROY Port Monitor
Security Printing Solutions User’s Guide -- 50-70537-001 Rev. B
5-3
Installing the
TROY Port
Monitor
Accessing
the TROY
Port Monitor
To install the TROY Port Monitor, ensure that the appropriate printer drivers are installed first, and then install
the port monitor (follow the instructions described in the TROY Quick-Start Guide). The TROY Port Monitor
software is located on the TROY Security Printing Solutions CD supplied with your TROY Security Printing
Solution.
The screens required to access the TROY Port Monitor differ slightly between the Windows operating systems
supported by the TROY Port Monitor (Microsoft Windows 98SE, ME, 2000/NT4.0, and XP). Once the TROY
Port Monitor is accessed, the screens within the TROY Port Monitor will appear identical across all Windows
operating systems.
T O ACCESS THE TROY PORT MONITOR IN W INDOWS 98SE OR W INDOWS ME:
1. Click on Start, Settings, and then
Printers.
2. Right-click on the desired TROY
printer icon, and then left-click on
Properties.
3. Click on the Details tab. Select the
desired printer driver and port that
corresponds to the TROY printer
being used, and then click on Port
Settings to access the TROY Port
Monitor.