TROY Group MICR_IRD M600 Security Printing Solutions series User’s Guide User Manual
Page 125
Advertising
Section 7
Using TROY Fonts
Security Printing Solutions User’s Guide -- 50-70537-001 Rev. B
7-17
TROY OCR-A
(continued)
NOTE: This OCR font must be used at the designated point size to ensure optical readability.
Size I – must use 12-point size (upper and lower case characters can be used)
Size III – must use 16-point size (only upper case characters can be used)
Size IV – must use 20-point size (only upper case characters can be used)
Advertising