TROY Group MICR_IRD M600 Security Printing Solutions series User’s Guide - Manual (Page 147)

Section 8 Troubleshooting / Error Messages
Security Printing Solutions User’s Guide -- 50-70537-001 Rev. B
8-9
Trouble-
shooting by
Symptom
(cont.)
Printer does not respond to a MICR
print request after the administrator
password is entered.
Invalid administrator password was
entered.
Enter the correct administrator
password.
NOTE: If the administrator password
has been lost or forgotten, perform the
following three steps:
1. Print a configuration page using
the printer control panel or TROY
Printer Utility.
2. Do not continue to print MICR
jobs.
3. Call TROY Technical Support for
assistance.