Deregister devices, Getting started – VTech SN6187 Abridged manual User Manual

Page 24

Advertising
background image

Getting started

Getting started

Getting started

17

Deregister devices

If you want to replace a device, or reassign the

designated handset number of a registered

handset, you must deregister all devices that are

registered to the telephone base. Then register

each device individually.
To make deregistration easier, read all of the

instructions on this page before you begin.
Make sure no handset is put in the telephone

base before deregistration.

To deregister all devices:

Press and hold

/FIND HANDSET at the side

of the telephone base for about 10 seconds

until the telephone base

IN USE light turns

solid red and then flashes red, then release

/

FIND HANDSET.

Immediately press /

FIND HANDSET.

All handsets show

To register HS, see

manual. The deregistration process takes

about 10 seconds to complete.

To register the handset(s) or pendant(s) to the

telephone base again, follow the registration

instructions on pages 15 and 16.

You cannot deregister all devices if any

system device is in use.

1.

2.
3.

Advertising