VEGA VEGASEL 543, 544, 545, 546, 547 - Manual (Page 7)

VEGASEL 7
Product description
Electrical isolation measures
Isolation acc. to VDE 0106,
part 101 between
power supply to level relay,
voltage and current input
- rated voltage 250 V
- test voltage 3 kV
Galvanic isolation between level relays between each other
- test voltage 1,5 kV
Potential isolation between transistor outputs
- test voltage 0,5 kV
CE-conformity
The signal conditioning instruments VEGASEL 543, 544, 545, 546 and 547 meet the objectives of EMVG
(89/336/EWG) and the NSR (73/23/EWG). The conformity is to the following standards:
EMVG Emission EN 50081-1
Immission EN 50082-2
NSR EN 61010
Mechanical data
Series Module instrument for carrier BGT 596
or housing type 505
Dimensions unassembled W = 25,4 mm (5 TE), H = 128,4 mm, D = 162 mm
1.4 Dimensions
Circuit board 100 x 160 x 1,5
European size
Multiway connector
162
100
128,4
25
5 TE
9
on
14,5
3
1.5 Approvals
In conjunction with suitable sensors and signal conditioning instruments auxiliary level switches VEGASEL can
be used as part of an overfill protection acc. to WHG or VbF. The approvals are in preparation.
VEGASEL meet the objectives of EMVG (89/336/EWG) and the EG-low voltage regulation (73/23/EWG).