Two-wire sensor – VEGA VEGAFLEX 52V User Manual
Page 21
Advertising
VEGAFLEX 51V and 52V
21
Set-up / Connection of the indicating instrument VEGADIS 50
3.3 Connection of the indicating instrument VEGADIS 50
Loosen the 4 screws of the housing cover on
VEGADIS 50.
You can facilitate the connection procedure
by fastening the housing cover during con-
nection on the housing by means of the
screws (figure).
VEGADIS 50
Two-wire sensor
Screws
Adjustment module
VBUS
to VEGADIS 50
(use screened cable. See
fig. 3.1 a or fig. 3. 1 b)
M20x1,5
Advertising