VEGA VEGAFLEX 52V - Manual (Page 24)

24 VEGAFLEX 51V and 52V
Set-up / Adjustment module MINICOM
Adjustment steps
On the following pages you see the menu
plan of the adjustment module MINICOM.
Set-up the sensor in the following sequence.
The numbers correspond to the sequence of
a set-up. The numbers are stated near the
appropriate menu points in the menu plan on
the following pages.
1. Adjustment
2. Conditioning
3. Outputs
4. Operating range
5. Meas. conditions
6. Indication of the useful and noise level
1. Adjustment
Under the menu point " Adjustment“ you in-
form the sensor with which span it should
work.
You can carry out the adjustment without or
with medium. Generally you will carry out the
adjustment without medium as you can adjust
without vessel filling.
Max.
Min.
100 % (distance to the medium
0,300 m) correspond to
1200 l, e.g. 20 mA
Span
0 % (distance to the medium
5,850 m) correspond to
456 l, e.g. 4 mA)
Ad-
just-
ment
Para-
meter
adjust-
ment
Sensor
m(d)
4.700
without
medium
Ad-
just-
ment
in
m(d)
0.0 %
at
m (d)
XX.XXX
(Min-adjustment)
OK
OK
OK
OK
Adjustment without medium
•
Enter with the " +“ and "–“ key the dis-
tance to the medium your sensor has at
0 % filling (example: 5,850 m)
If you do not know the distance, you have
to sound.
• Enter the distance to the medium which
your sensor has at 100 % filling.
Key Display
1)
In case of two values which can be modified
you can move with the "OK“-key to the sec-
ond value.
Adjustment with medium
Fill the vessel e.g. to 10 %, enter in the menu
"
Min-adjustment“ with the "+“ and "–“ keys
10 % and confirm with the "OK“-key. Then fill
the vessel e.g. to 80 % or 100 %, enter in the
menu "
Max-adjustment“ with the "+“ and "–“
keys 80 % or 100 % and confirm with the
"OK“-key.
with
medium
Min.
adjust
at %
XXX.X
Max.
adjust
at %
XXX.X
1)