VEGA VEGASON 66 Profibus PA - Manual (Page 26)

10 Tighten the compression nut of the cable entry, the seal
ring must completely encircle the cable
11 Connect the lead cable for power supply in the same way
acc. to the wiring plan, in addition connect the ground
conductor to the inner ground terminal.
12 Screw the housing cover back on
The electrical connection is hence finished.
Fig. 16: Connection steps 5 and 6
5.3 Wiring plan, double chamber housing
1 2 3
4
5
Fig. 17: Double chamber housing
1 Housing cover, connection compartment
2 Blind stopper or plug M12x1 for VEGADIS 61 (option)
3 Housing cover, electronics compartment
4 Filter element for pressure compensation or blind stopper with version IP 66/
IP 68, 1 bar 1)
5 Cable entry or plug
1) Version IP 66/IP 68, 1 bar not with four-wire instruments
Housing overview
26 VEGASON 66 - Profibus PA
Connecting to voltage supply
28789
-EN
-060731