VEGA VEGAWAVE 62 Cable shortening set - Manual (Page 10)

9 10 19
Fig. 6: Pull the cable out the of upper part of the oscillator
9 Cable
10 Breaker plate
19 Upper part of the oscillator
11 Pull the cut cable (9) out of the upper part of the oscillator
(19).
Keep all parts for mounting.
7 9 12 10
Fig. 7: Cut the suspension cable (12) with a bolt cutter
7 Cable clamp
9 Cable
10 Breaker plate
12 Suspension cable
12 Cut the suspension cable (12) with a bolt cutter and keep
the breaker plate (10) for mounting.
13 Clean the remaining sensor cable (9) from oil and grease
and rub it off with talcum.
The old cable crimping can be no longer used and must be
disposed accordingly.
10 VEGAWAVE 62 - Cable shortening set
Mounting
32361
-EN
-060822