VEGA VEGAWAVE 62 Cable shortening set - Manual (Page 9)

14 9 19
Fig. 4: Turn the vibrating element
9 Cable
14 Pressure screw
19 Upper part of the oscillator
9 Loosen the upper part of the oscillator (19) with gaspipe
pliers and unscrew it. Both threaded connections are
secured with soluable screw retention lacquer.
Make sure that the cable (9) does not turn.
A B
Fig. 5: Uncompress the vibrating element carefully - cut the leads
A Upper part of the oscillator
B Lower part of the oscillator
10 Uncompress the two parts (A and B) carefully.
Cut the leads directly on the clead pressing (see arrows)
with wire cutting pliers.
VEGAWAVE 62 - Cable shortening set 9
Mounting
32361
-EN
-060822