3 product description, 1 configuration, 2 principle of operation – VEGA VEGAWAVE 62 Cable shortening set User Manual
Page 5: 3 storage and transport
3 Product description
3.1 Configuration
The scope of delivery encompasses:
l
Cable shortening set
l
Documentation
- this operating instructions manual
3.2 Principle of operation
The cable shortening set is a set of parts required to shorten a
VEGAWAVE 62.
The cable shortening set can be also used e.g. if the sensors
must be led through a narrow tube.
The cable shortening set must not be used if the concerned
sensor is used for solid detection in water.
The cable of the sensor consists of a suspension cable, the
electrical wires and an outer insulation.
3.3 Storage and transport
Your instrument was protected by packaging during transport.
Its capacity to handle normal loads during transport is assured
by a test according to DIN EN 24180.
The packaging of standard instruments consists of environ-
ment-friendly, recyclable cardboard. For special versions, PE
foam or PE foil is also used. Dispose of the packaging material
via specialised recycling companies.
l
Storage and transport temperature see "Supplement -
Technical data - Ambient conditions"
l
Relative humidity 20 … 85 %
Scope of delivery
Area of application
Physical principle
Packaging
Storage and transport tem-
perature
VEGAWAVE 62 - Cable shortening set
5
Product description
32361
-EN
-060822