VEGA VEGAWAVE 62 Cable shortening set User Manual
Page 14
24 Merge the screening of the wires (yellow) and (green) and
twist ist. Insulate the twisted screening with the black
crimping sleeve (4) according to the drawing. Shrink the
transition green-black-yellow in the isolated wire with the
blue crimping sleeve (3).
6
GN/YE
GN
BK
YE
RD
GN/YE
GN
BK
YE
RD
7
12
Fig. 12: Connect wires
6
Pins
7
Clamp terminal
12 Suspension cable
GN Green
BK Black
YE Yellow
RD red
GN/YE
Green-yellow
25 Dismantle the wires on 5 mm (0.2 in) and connect with the
crimp connectors and crimping pliers according to drawing.
1
2
3
14
19
Fig. 13: Connect wires with crimping pliers
1
Crimp connection - yellow (2 pcs.)
2
Crimp connection - red (3 pcs.)
3
Shrinking sleeve - blue
14 Pressure screw
19 Upper part of the oscillator
26 Merge the parts of the vibrating element (A + B). Provide
the thread with screw retention lacquer. Make sure that you
do not squeeze any wires.
The cable must not turn.
14
VEGAWAVE 62 - Cable shortening set
Mounting
32361
-EN
-060822