VEGA VEGAWAVE 62 Cable shortening set - Manual (Page 11)

6 18 17 9 8 14 15 16 19 10 7
100 mm
(3 15 /
16
")
Fig. 8: Shift the parts to the cable
6 Pins (4 pcs.)
7 Cable clamp
8 Mounting boss
9 Cable
10 Breaker plate
14 Pressure screw
15 Pressure ring
16 Rubber cover
17 Washer
18 Rubber rings (4 pcs.)
19 Upper part of the oscillator
14 Shift the individual parts (14, 15, 16, 17, 18, 19) to the
cable according to drawing.
Make sure that the shoulder of the washer (17) points in the
direction of the pressure ring (15).
15 Remove the outer isolation of the cable on 100 mm (4 in)
length.
16 Shorten the suspension cable (12) with a bolt cutter by
70 mm (2.8 in) (remaining length: 30 mm/1.2 in).
VEGAWAVE 62 - Cable shortening set 11
Mounting
32361
-EN
-060822