VEGA VEGATOR 632 User Manual
Page 14
Fig. 6: Additional electronics for line break monitoring in conjunction with a
conductive probe
1
Connect the eyelet according to the following illustration.
Make sure that the eyelets have no contact to other metal parts.
2
Open one of the other terminals and attach the additional
electronics.
3
Tighten the terminal.
1
2
Fig. 7: Mounting of the additional electronics for line break monitoring
1
Connection to terminal 1 (ground rod = longest rod)
2
Connection to terminal 2 (max. rod = shortest rod)
3
Additional electronics for line break monitoring
If you are using a probe without additional electronics for line break
monitoring, a fault signal will be triggered.
Keep in mind that in case of a fault signal also the switching output will
be activated.
Only failures of channel 1 are monitored.
14
VEGATOR
632 • Signal conditioning instrument
5 Connecting to power supply
35243
-EN
-120228