VEGA VEGATOR 632 User Manual
Page 22
3-step switch for mode adjustment of the second output relay. The
individual switch positions are assigned as follows:
1
2
3
4
5
6
7
8
O
N
3
1
3362
CH1 output parallel
CH2 output separate
CH1 with alarm
Fig. 16: Slide switch for adjustment of the relay outputs (D)
l
CH
1 output parallel - Both relay outputs switch in parallel. The
second relay (15 - 17) switches analogue to relay 1 (4 - 6)
l
CH
2 output separate - Two-point control or two independent relay
outputs. The second relay (15 - 17) switches independently of
relay 1 (4 - 6)
l
CH
1 with alarm - Fault signal with relay output 2. The second relay
(4 - 6) triggers a fault signal.
3-step switch for adjustment of the switching delay. The adjusted
switching delay applies to the switch on and switch off delay.
O
N
3
1
3362
6 s
3 s
0,5 s
1
2
3
4
5
6
7
8
Fig. 17: Slide switch for setting the switching delay (E)
l
6 s
l
3 s
l
0.5 s
Slide switch for adjust-
ment of the relay out-
puts (D)
Slide switch for setting
the switching delay (E)
22
VEGATOR
632 • Signal conditioning instrument
6 Adjustment elements
35243
-EN
-120228