VEGA VEGAPULS 68 (≥ 2.0.0 - ≥ 4.0.0) Profibus PA - Manual (Page 42)

42
6 Set up with the indicating and adjustment module
VEGAPULS 68 • Profibus PA
36537-EN-130205
•
Vessel of concrete or metal, also multiple chamber silo:
– Structured vessel walls
– Installations present
•
Process/measurement conditions:
– Measured value jumps, e.g. by truck loading
– Large distance to the medium
– Large angles of repose
Heap:
•
Sensor mounting on movable conveyor belts
•
Detection of the heap profile
•
Height detection during filling
•
Process/measurement conditions:
– Measured value jumps, e.g. by the profile of the heap or traver-
ses
– Large angles of repose
– Measurement near the filling stream
Crusher:
•
Vessel: installations, wear and protective facilities available
•
Process/measurement conditions:
– Measured value jumps, e.g. by truck loading
– Fast reaction time
– Large distance to the medium
Demonstration:
•
Adjustment for all applications which are not typically level mea-
surement
•
Sensor accepts all measured value changes within the measuring
range immediately
•
Typical applications:
– Instrument demonstration
– Object recognition/monitoring (additional settings required)
Through this selection, the sensor is adapted optimally to the appli-
cation or the location and measurement reliability under the various
basic conditions is increased considerably.
Enter the requested parameters via the appropriate keys, save your
settings with [OK] and jump to the next menu item with the [ESC] and
the [->] key.
With this selection, the operating range of the sensor is adapted to
the vessel height and the reliability with different frame conditions is
increased considerably.
Independent from this, the min. adjustment must be carried out.
Enter the requested parameters via the appropriate keys, save your
settings with [OK] and jump to the next menu item with the [ESC] and
the [->] key.
Setup/Vessel height,
measuring range