4 saving the parameter adjustment data – VEGA VEGAPULS 68 (≥ 2.0.0 - ≥ 4.0.0) Profibus PA User Manual
Page 49
49
6 Set up with the indicating and adjustment module
VEGAPULS 68 • Profibus PA
36537-EN-130205
Menu
Menu item
Default value
Setup
Measurement
loop name
Sensor
Medium
Liquid/Water
Bulk solids/Crushed stones, gravel
Application
Storage tank
Silo
Vessel form
Vessel bottom, dished boiler end
Vessel top, dished boiler end
Vesell height/
Measuring range
Recommended measuring range, see
"Technical data" in the supplement
Min. adjustment
Recommended measuring range, see
"Technical data" in the supplement
Max. adjustment
0,000 m(d)
AI FB1 Channnel PV (lin. perc.)
AI FB1 scaling
unit
Height
%
AI FB1 scaling
0.00 lin %, 0.00 %
100.00 lin %, 100.00 %
AI FB1 damping
0 s
Lock operation
Released
Display
Language
Like order
Displayed value
SV 1
Backlight
Switched off
Additional adjust-
ments
Distance unit
m
Temperature unit °C
Unit SV2
m
Probe length
Length of the standpipe Ex factory
Linearization
curve
Linear
Sensor address
126
6.4 Saving the parameter adjustment data
We recommended noting the adjusted data, e.g. in this operating
instructions manual, and archiving them afterwards. They are thus
available for multiple use or service purposes.
If the instrument is equipped with an indicating and adjustment modu-
le, the data in the sensor can be saved in the indicating and adjust-
ment module. The procedure is described in the operating instructions
manual "Indicating and adjustment module" in the menu item "Copy
sensor data". The data remain there permanently even if the sensor
power supply fails.