VEGA VEGADIS 62 - Manual (Page 31)

Adjustment of the display contrast
Adjustment range: 0 … 4
With a reset, all settings of the digital indication will be reset to the
default values. For activating the reset, the "OK" key must be pushed
once. After pushing the "OK" key for a second time, the indication will
be completely faded out and the reset is carried out. The VEGADIS 62
carries out a restart, starts again the HART communication and passes
over to the measured value indication.
The following table shows the default values:
Menu section Menu item Default value
Measurement Unit (if no HART adjustment was carried
out)
Measuring range
begin 4.000
Measuring range
end 20.000
Measuring range
decimal point 0.000
Damping 2
Address 0
Indication Unit mA
Unit locking nGESP
Configuration/Contrast
Configuration/Reset
VEGADIS 62 31
6 Set parameters
36469
-
EN
-120329