VEGA VEGADIS 62 - Manual (Page 33)

Setting the current value that triggers the max. failure message when it
is reached or exceeded. The max. failure message is shown in the
display with 5 overlines ( ¯ ¯ ¯ ¯ ¯ ) and the message "AUSMAX" (or
"OUTMAX"
).
Adjustment range: 20.1 … 21.5
The number of the firmware used is displayed.
This menu item is available from software 2.10.
The menu area "Measurement" as well as the function "Reset" are
protected by a password. For the access, a login by entering the
password is required. The login is displayed if you try to use one of the
protected functions. All functions are accessible after a successful
login.
The logoff is carried out in the menu item "Logoff“ or automatically after
3 minutes without user activity.
The default setting is: 123456
The password has max. 6 characters and can be modified in the menu
item "Password". For this purpose, the actual password is entered and
confirmed with "OK" until the string "******" appears. With "OK" the
entered password is edited again and can now be modified.
The master password AWI001 allows access if the password setting is
no longer known.
Configuration/Max. failu-
re message
Configuration/Firmware
Configuration/Password
VEGADIS 62 33
6 Set parameters
36469
-
EN
-120329