5 connecting via ethernet, Wha-gw, Commissioning – VEGA WHA-GW-WIRELESSHART GATEWAY User Manual
Page 37: Connecting to the gateway via ethernet
WHA-GW-*
Commissioning
22
1981
2011
-0
7
37
4.5
Connecting via Ethernet
Once the gateway has been connected to the Ethernet (see chapter 3.3), you are ready to
connect your PC.
Connecting to the gateway via Ethernet
1. Connect the Ethernet cable to the Ethernet jack of your PC.
2. To communicate with the gateway, you need to configure the IP address and subnet
mask of your PC. To do this, launch the Network Connections window (Windows
®
XP:
Start > Settings > Control Panel > Network Connections).
3. Right-click on the icon Local Area Connection and choose Properties from the
context menu.
The Local Area Connection Properties window opens.
Local Area Connection Properties window
4. Select the list entry Internet Protocol (TCP/IP).
5. Press Properties.
The Internet Protocol (TCP/IP) Properties window opens.