VEGA WHA-GW-WIRELESSHART GATEWAY - Manual (Page 43)

WHA-GW-*
Commissioning
22
1981
2011
-0
7
43
4.6.3 Adding Device DTM
Adding the Device DTM
1. In the project view, right-click on the entry of the communication DTM you have added in
the previous step.
2. To add the device DTM, choose Add device.
The Device for window opens (see on page 43).
Device for window with Gateway DTM
3. Select the entry WHA-GW.
HART IP communication DTM parameters Corresponding Gateway parameters
Parameter Explanation Default Parameter Default
Tag Gateway name in the
Project view of
PACTware. Any name
may be entered (not
relevant for
connection to
gateway) WHA-GW – –
Bus
Address Gateway polling
address; must match
the settings of the
Gateway. 1 Parameterization
> Wired Communication
> Protocols > HART
> Bus Address 1
UDP
Address IP address of the
Gateway; must match
the settings of the
Gateway. 192.168.1.1 Parameterization
> Wired Communication
> Interfaces > Ethernet
> IP Address 192.168.1.1
UDP Port Gateway port number
(HART over UDP);
must match the
settings of the
Gateway. 5094 Parameterization
> Wired Communication
> Protocols > HART
> Port Number 5094