VEGA WHA-GW-WIRELESSHART GATEWAY - Manual (Page 39)

WHA-GW-*
Commissioning
22
1981
2011
-0
7
39
Adding RS485 Communication DTM
1. Select the entry HOST PC in the project view of your PACTware project.
2. Choose or click the Add device icon on the toolbar.
Device > Add device
The Device for window appears (see on page 39).
Selection of HART communication DTM
3. Select the entry HART Communication.
4. Click OK.
The HART communication DTM is added to the project.
HART communication DTM in PACTware project
5. To edit the parameters, double-click on the HART communication DTM.
The parameter window appears.
Note!
The HART CommDTM is not included in the WirelessHART DTM Collection. It can be
downloaded separately from www.pepperl-fuchs.com. For further information on
downloading and installing the DTM, see chapter 4.2.