VEGA WHA-GW-WIRELESSHART GATEWAY - Manual (Page 41)

WHA-GW-*
Commissioning
22
1981
2011
-0
7
41
Adding Ethernet Communication DTM
1. Select the entry HOST PC in the project view.
2. Choose Device > Add device or click the Add device icon on the toolbar.
A device selection window opens (see on page 41).
Selection of the communication DTM
3. Select the entry HART IP Communication.
4. Click OK.
The Ethernet communication DTM is added to the project.
Ethernet communication DTM in PACTware project
5. To edit the parameters, double-click on the HART IP Communication DTM.
The parameter window appears.